Universal Turning Centre For Complete Manufacturing Of Bar Stock And Chuck Work
Salient features
| Model | - | EMCOTURN E65 | ||||
| Work Area | ||||||
| Swing over bed | mm | 610 | ||||
| Swing over cross slide | mm | 360 | ||||
| Distance (spindle nose - centre) | mm | 682 | ||||
| Maximum turning diameter | mm | 500 | ||||
| Maximum part length | mm | 520 | ||||
| Maximum bar stock diameter | mm | 65 (95) | ||||
| Travel | ||||||
| Travel in X axis | mm | 260/610 | ||||
| Travel in Y axis | mm | 80 (±40) | ||||
| Travel in Z axis | mm | 260/610 | ||||
| Main Spindle | ||||||
| Speed Range | Rpm | 0-5000 (3500) | ||||
| Drive Performance | Kw | 22 | ||||
| Spindle Torque | Nm | 305 (380) | ||||
| Spindle nose DIN 55026 | - | A2-6 | ||||
| Spindle Bearing (inner diameter at front) | mm | 105 | ||||
| Spindle bore | mm | 73 | ||||
| Counter Spindle | ||||||
| Speed Range | Rpm | 0-5000 | ||||
| Maximum drive performance | Kw | 16.5 | ||||
| Max. Torque on the spindle | Nm | 125 | ||||
| Spindle nose DIN 55026 | - | A2-6 | ||||
| Spindle bearing (inside diameter at front) | mm | 105 | ||||
| Spindle bore hole | mm | 73 | ||||
| C-Axis | ||||||
| Resolution | - | 0.001° | ||||
| Rapid motion speed | Rpm | 1000 | ||||
| Tool turret | ||||||
| No. of tool positions | No. | 12 | ||||
| Tool holding shaft in accordance with VDI (DIN 69880) | mm | 30 (40) | ||||
| Tool cross-section for square tools | mm | 20x20 (25x25) | ||||
| Shank diameter for boring bars | mm | 32 | ||||
| Turret/Tool indexing time | Sec | 0.7 | ||||
| Driven tools DIN 5480 | ||||||
| Drive performance | Kw | 6.7 | ||||
| Torque | Nm | 25 | ||||
| Speed range | Rpm | 0-5000 (4500) | ||||
| Feed drives | ||||||
| Rapid motion speed X/Y/Z | M/Min | 30/15/30 | ||||
| Feed force in X/Y/Z axis | N | 5000/7000/7000 | ||||
| Position variation Ps in accordance with VDI 3441 in X/Y/Z | µm | 3.5/3.5/4 | ||||
| Automatic tailstock | ||||||
| Tailstock travel | mm | 500 | ||||
| Maximum thrust | N | 8000 | ||||
| Max. Travel speed | M/Min | Approx. 20 | ||||
| Quill bore taper | - | MT 4 | ||||
| Coolant system | ||||||
| Tank volume | Ltrs | 230 | ||||
| Pump Performance | Kw | 0.57 (2.2) | ||||
| Dimensions and weight | ||||||
| Height of centres above floor | mm | 1150 | ||||
| Machine height | mm | 2060 | ||||
| Required space for machine (LXD) | mm | 3480x2080 | ||||
| Total weight | Kg | Approx. 6500 | ||||
| Compact Load | ||||||
| Bar length | mm | 150-1100 | ||||
| Bar diameter | mm | 8-65 | ||||
| Material storage | mm | Approx. 550 | ||||
| Length | mm | 1700 | ||||
| Width | mm | 1100 | ||||
| Weight | Kg | Approx. 500 | ||||
| Height (spindle centre) | mm | 1097 | ||||