High-Performance Turning/Milling Center For Complete Machining Of Complex Workpieces In One Operation
Salient features
| Model | - | HYPERTURM 65 POWERMILL | ||||
| Work Area | ||||||
| Swing over bed | mm | 50 | ||||
| Distance (spindle nose - centre) | mm | 1300 | ||||
| Maximum turning diameter | mm | 500 | ||||
| Maximum part length | mm | 1040 | ||||
| Maximum bar stock diameter | mm | 65 (76/95) | ||||
| Travel | ||||||
| Travel in X axis | mm | 405/210 | ||||
| Travel in Y axis | mm | 220/100 | ||||
| Travel in Z axis | mm | 1040/1050 | ||||
| Main Spindle | ||||||
| Speed Range | Rpm | 0-5000 (3500/4000) | ||||
| Spindle Torque | Nm | 250 (280) | ||||
| Spindle nose DIN 55026 | - | A2-6 (A2-8) | ||||
| Spindle Bearing (inner diameter at front) | mm | 105 (130/140) | ||||
| Spindle bore | mm | 73 (86/106) | ||||
| Counter Spindle | ||||||
| Speed Range | Rpm | 0-5000 | ||||
| Max. Torque on the spindle | Nm | 250 (280) | ||||
| Spindle nose DIN 55026 | - | A2-6 (A2-8) | ||||
| Spindle bearing (inside diameter at front) | mm | 105 (130/140) | ||||
| C-Axis | ||||||
| Resolution | - | 0.001° | ||||
| Rapid motion speed | Rpm | 1000 | ||||
| Milling Spindle- Powermill | ||||||
| Speed Range | Rpm | 0-12000 (18000) | ||||
| Maximum Torque | Nm | 78 (38) | ||||
| Maximum Drive power | Kw | 29 (39) | ||||
| Type of tool Shank | - | HSK-T63 | ||||
| B-Axis | ||||||
| Travel Range | - | 220° | ||||
| Holding Torque of clamp | Nm | 4000 | ||||
| Interpolating drive torque | Nm | 332 | ||||
| Tool Magazine | ||||||
| Tool Storage capacity | mm | 20/40/80 | ||||
| Max. Tool Diameter | mm | 80 (120) | ||||
| Max. tool length | mm | 250 | ||||
| Max. Tool weight | Kg | 5 | ||||
| Tool turret | ||||||
| No. of tool positions | No. | 12 | ||||
| Tool holding shaft in accordance with VDI (DIN 69880) | mm | 30 (40) | ||||
| Tool cross-section for square tools | mm | 20x20 (25x25) | ||||
| Shank diameter for boring bars | mm | 32 (40) | ||||
| Turret/Tool indexing time | Sec | 0.7 | ||||
| Driven tools DIN 5480 | ||||||
| Drive performance | Kw | 6.7 | ||||
| Torque | Nm | 25 | ||||
| Speed range | Rpm | 0-5000 (4500) | ||||
| Turrent with BMT-interface and direct drive | ||||||
| No. of tool positions | No. | 12 | ||||
| precision interface | - | BMT-55P | ||||
| Tool cross-section for square tools | mm | 20x20 (25x25) | ||||
| Shank diameter for boring bars | mm | 40 | ||||
| Tool change time | Sec | 0.5 | ||||
| Speed range of the driven tools | Rpm | 0-12000 | ||||
| Torque of the driven tools | Nm | 30 | ||||
| Driving power of the driven tools | Kw | 10 | ||||
| Feed drives | ||||||
| Rapid motion speed X/Y/Z | M/Min | 30/12/30 | ||||
| Feed force in X/Y/Z axis | N | 5000/7000/8000 | ||||
| Coolant system | ||||||
| Tank volume | Ltrs | 450 (300) | ||||
| Coolant pump for the tool turrent | - | 2x14 bar | ||||
| Flushing pumps for the work area | - | 2x3.7 bar | ||||
| Dimensions and weight | ||||||
| Height of centres above floor | mm | 1316 | ||||
| Machine height | mm | 2490 | ||||
| Required space for machine (LXD) | mm | 5300x3340 | ||||
| Total weight | Kg | 12250 | ||||